KraussMaffei Extrusion Develops Single-Stage PVC InlineMixing for Roofing Membranes

The continuous process feeds PVC powder, plasticizers, additives and fillers directly into a twin-screw extruder, eliminating separate dryblend mixing and targeting lower energy, space and labor costs.

KraussMaffei Extrusion has developed PVC InlineMixing, a single-stage extrusion process for PVC roofing membranes that replaces conventional two-stage dryblend production. Instead of preparing a dryblend in a separate hot-cold mixer, the new line feeds all solid and liquid components directly into the extruder through gravimetric dosing systems.

In traditional production, PVC powder, plasticizers, additives and fillers are processed batchwise in a heating-cooling-mixing combination. The resulting dryblend is cooled, stored and later plasticized in a twin-screw extruder before being formed into membrane. The new process removes those intermediate steps, and KraussMaffei says the material is heated only once.

Lower energy and operating costs

According to KraussMaffei, eliminating the separate mixing stage avoids investment in a heating-cooling-mixing combination and reduces energy consumption and energy costs by up to 75%, depending on formulation, system parameters and location. The company also cites lower space requirements and labor costs, as well as reduced maintenance because wear parts for the heating-cooling mixer are no longer needed.

Those changes lower both capital expenditure and operating costs, the company says, improving overall cost-effectiveness and creating conditions for a rapid return on investment.

More flexible formulation changes

PVC InlineMixing also allows formula adjustments and color changes to be made directly during operation through the integrated control system, according to KraussMaffei. Because there is no separate dryblend batch to prepare and store, the process avoids time-consuming intermediate steps and can respond more quickly to changing requirements.

“For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing,” said Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion. He added that manufacturers can adjust formulations during production while reducing energy and capital expenditure.

Trials and industrial reference

The process was developed at KraussMaffei Extrusion’s Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating ZE 65 BluePower twin-screw extruder equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume provides a wide process window for different formulations.

Tests confirmed what the company describes as excellent PVC gelation and high product quality. Mechanical properties and weldability met industrial requirements across several formulations, according to KraussMaffei. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that the Technology Center works with customers to test specific formulations under production-relevant conditions and optimize the process.

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders. PVC, additives and fillers, along with edge trimmings generated in the process, are continuously processed directly into finished membranes. KraussMaffei says the approach combines high product quality with a leaner production process.

CO

Chidi Okonkwo

Chidi Okonkwo covers factory automation and motion systems, including industrial robot cells, PLC-controlled assembly lines, servo drives, and machine vision inspection stations. His coverage works from measurable parameters such as cycle time, positioning repeatability, payload and reach margins, drive sizing calculations, and safety-related control boundaries rather than unverified throughput claims. He writes for automation engineers, manufacturing engineering directors, and capital procurement managers who must compare cell designs, specify interfaces, and accept a line against quantified commissioning results.