3T-AM’s shift from prototypes to production: repeat orders, machining control and the limits of scale

The Newbury metal AM manufacturer says production accounts for about 70% of revenue, while new product introduction still absorbs most engineering time as it invests against contracted demand.

3T-AM’s experience offers a practical view of what it takes for a metal additive manufacturing contractor to move from prototyping to production. Commercial director Eddie Andrews says repeat orders now account for around 70% of the Newbury company’s revenue, while new product introduction still takes up roughly 80% of the team’s time. Production work pays for capacity; development work keeps the next production job in view.

The company dates its business to 1997 and received its first metal machine around 2008. By the 2021 reset described by Andrews, years of accommodating individual prototype jobs had produced a shop floor with too many accumulated processes. 3T-AM narrowed its customer base, gave larger accounts more influence over development priorities and simplified procedures. Much of the work remained manual while the team established which operations it could reliably repeat. Repeatability is the foundation of production: a process must be repeatable before it can be sold as a repeat order.

From prototype logic to production ownership

Andrews joined in November 2021. At that point, 3T-AM knew how to make a one-off metal component for hundreds of customers; the harder question was how to win the order to make the same component again, deliver it at the agreed price and do so on schedule. Andrews framed the challenge as making the work “boring” and turning it into general manufacturing. Prototype work can absorb engineering judgment case by case. Production work requires an operation that can be repeated, quoted and handed over.

Changing who owned a job mattered as much as changing equipment. When the first person to see a drawing was the engineer responsible for printing it, the natural question was how to print the part. Decisions at that stage shaped the work passed to everyone else. Today a product owner is responsible for delivering the finished component. Print and machining specialists agree what condition the part should be in as it moves from one operation to the next. That handover discipline links printing to downstream operations.

Machining is part of the additive case

Andrews argues that a successful additive manufacturer also needs to be a good CNC machining company. Bringing machining in-house gave the SME more control over costs, quality and delivery dates. Larger multi-laser machines improved productivity at the printing stage. Neither investment on its own could tell a customer when a finished part would arrive. A printed component is rarely delivered straight from the build chamber: it must be removed from its plate, supports taken off and critical surfaces machined. Production promises depend on those steps as much as laser throughput.

The commercial transition was harder to time than the technical one. Production orders rose and then tapered off. Turning away too much prototype work during the upswing would have left gaps when demand eased. Repeat orders now give 3T-AM room to choose which development jobs to take. Some will never become production contracts, but Andrews says that without taking part in the journey, the company would never find out. This is a portfolio problem rather than a simple switch: development work supplies learning and customer access, while production supplies revenue and utilization.

Buying machines against orders

SBO, an Austrian precision manufacturing group, acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long. What interested the group was 3T-AM’s metal printing expertise and access to a different set of industrial customers. SBO approved a five-year business plan, and Andrews recalls the board asking whether it could be done quicker.

In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing. Those purchases were part of a seven-printer expansion across the UK and US operations. A full order book makes the next machine easier to justify. It also leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand, and the work 3T-AM cannot yet offer. The first is a capacity decision. The second is an option on future business, and it competes for the same machine hours.

The customer mix reflects where production demand is coming from. Semiconductor customers generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to the company’s plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume. A pre-pandemic aerospace enquiry illustrates the scale problem. A single family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, the capital and the capacity to take it on. Andrews sees that as one reason original equipment manufacturers still keep sizeable additive programmes in-house.

What the customer can measure

The value case changes with volume. For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes the calculation gets tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory working a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.

A project with Honeywell Aerospace will put another claim for additive manufacturing to the test. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service. That is a more demanding test than a headline claim about material savings: it asks whether the printed route performs better across the full life cycle.

3T-AM is also preparing a customer-facing form of production data. As it connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing they could expect from a routine order. The ambition is clear, but it remains a target rather than a completed service.

The production test

The 3T-AM case suggests that the move from prototypes to production is less about a single machine purchase than about the operating system around the machine: who owns the finished part, how operations hand off, how machining is controlled, how orders are timed and how costs are spread. Production now provides most of the revenue, but new product introduction still consumes most of the team’s time. That tension is not a failure of the model. It is the model’s cost of staying relevant.

The limits are equally important. A full order book can justify capacity but can crowd out material qualification and product development. High-volume economics depend on utilization, maintenance and consumables, not only on print speed. Customer adoption depends on lead time, unit cost and, increasingly, documented environmental performance. 3T-AM’s plans for digital product passports and its Honeywell life-cycle assessment are attempts to make those factors measurable. Whether they become routine depends on delivery against those targets, not on the promise alone.

ZM

Zora Marinkovic

Zora Marinkovic covers metal castings, forgings, and ferrous and copper-base powders as an editorial process metallurgy editor. Her coverage anchors on measurable items such as casting shrinkage, inclusion indications, forging flow lines, powder particle size distribution, oxygen content, flowability, and sintered density, referenced to reported test conditions rather than blanket claims. She helps casting and forging quality engineers, powder metallurgy buyers, and plant managers compare process records, set inspection and acceptance criteria, and judge lot traceability.